Maintenance and replacements
9 articles
- Handling installer warranty disputes
- Requesting on-site service
- Breaker firmware update procedure
- Controller firmware update procedure
- Replacing a faulty breaker · field procedure
- Replacing a faulty controller - field procedure
- Controller reboot and reset procedures
- Setup mode and work mode: flipping a breaker's dip switch during addressingHow to move a Hybird breaker from work mode to setup mode for addressing and back again, using the green dip switch, with LED confirmation at every step.
- Adding a breaker to an operating panel · the remote addressing flowHow a new breaker is added to a panel that is already Operating · Hybird support sends the address command remotely via the controller while you handle the dip switch…
