Hybird OS is where you can see everything about your electrical system. This guide explains what you see when you log in.
Logging in
Open your Hybird OS URL (provided during onboarding) in any web browser. Enter your email and receive a magic link.
Site overview
After logging in, you see your site listed with its name and address. Click on the site to see the details. If you have multiple sites, they are all listed here.
Controllers
Your site shows one or more controllers. Each controller manages the breakers in one panel. You can see whether the controller is online (with a "last seen" timestamp) and how many breakers are connected to it.
Breakers
Each breaker is listed with a name describing the circuit it protects (e.g., "Garage lighting" or "Heat pump"). For each breaker, you can see:
State:Whether the breaker is currently on or off.
Current power:How many watts the circuit is consuming right now.
Consumption:How many kWh the circuit has used in the last 24 hours and 30 days.
Click on any breaker to see detailed data including voltage, current, temperature, leakage, and historical charts.
What the numbers mean
If you are not familiar with electrical measurements, here is a quick guide:
Power (W):How much electricity the circuit is using right now. Think of it as the "speed" of consumption.
Consumption (kWh):How much electricity the circuit has used over time. This is what you pay for on your electricity bill.
Voltage (V):The electrical pressure. Should be around 230V - if it is significantly different, there may be a supply issue.
Temperature (°C):How hot the breaker is. Higher load means higher temperature. This is normal within limits.
Need help?
If you do not understand something on your dashboard, contact Hybird support - they can walk you through it.
Email: [email protected] | Phone: +45 3020 4900
Need help?
Technical support: [email protected]
Billing and invoicing: [email protected]
Sales and partnerships: [email protected]
Phone: +45 3020 4900