The Hybird app shows you what every circuit in your panel is doing · what it has used, what it is drawing right now, and the switch to turn it on or off. This article walks through each view. To get the app installed first, see Getting the Hybird mobile app · download and install.

Each panel has its own page, headed by its name and current state. An operating panel shows the Operating badge and its journey through the four lifecycle stages · Planning, Assembling, Deploying, Operating · plus a card with its site, client, creation date and notes.

The Consumption section shows the panel's total in kWh for the period you pick · Day, Week or Month · broken down by circuit. Every circuit your electrician labelled has its own colour · heat pump, kitchen sockets, lighting · so you can see at a glance what is using what, hour by hour.

Pinch with two fingers to zoom into the chart, swipe horizontally when zoomed, and double tap to reset.

The Live measurements section shows the panel as it is right now, updated as you watch:

For what each measurement means and what normal looks like, see Viewing real-time breaker data.

Under Actions, the flip button switches the breaker · it reads Flip off when the breaker is on, and Flip on when it is off. Switching a breaker off de-energises everything downstream of it, so make sure no one is working on the circuit and nothing that needs power is on it. The full guide, including what to check if it will not switch, is at Switching a breaker on or off from the Hybird platform.

Open your panel to see its state and story, read consumption by day, week or month circuit by circuit, watch voltage, current and power live per phase, and switch a circuit with the flip button. Everything the panel measures, in your pocket.